Connect to Wifi Inside ArborXR's Home Environment
To enable wifi while inside ArborXR's home environment, do the following:
1. Select the wifi symbol in the tray
2. Switch the toggle on next to the word "status." Confirm the wireless network connects.
3. Select the content button at the far left of the tray to go back to the content window. Start the experience by clicking on the Moth+Flame App icon within the content window.
For more information on using the home environment, please visit ArborXR's help resource, here.
Related Articles
How to Un-Install & Re-Install ArborXR + Update Moth+Flame VR app
Is your device stuck within the ArborXR home environment (e.g. unable to connect to WiFi, are stuck in an endless loop of prompts, and are unable to exit ArborXR Home to update the system OS)? To avoid factory resetting the device, try the following ...Clone a VR Headset to Update a Device Fleet without Wifi
If a fleet of devices requires an update and the headsets do not have access to wifi, there are two ways to deploy module updates: 1. Use an MDM (ArborXR) configuration package 2. Use SideQuest to clone a VR headset - Prerequisites for using this ...How to provision ArborXR configuration packages on your VR devices
This guide provides step-by-step instructions on how to provision ArborXR configuration packages with the Moth+Flame app to your VR devices using the ArborXR Device Setup App. You should follow this method when you need to configure multiple devices ...How to Use the Data Transfer Tool
The Data Transfer Tool assists Administrators in transferring session reports from one or multiple VR device(s) to promisevr.com in the absence of wifi. This tool works on PC and Mac operating systems. Your computer will need access to wifi before ...Manually transfer files from a Data Transfer Tool .zip file (if Data Transfer Tool is causing errors while uploading .zip)
If a fleet of devices requires an update and the headsets do not have access to wifi, and the Data Transfer Tool is not available or there was an error, there are two ways to deploy module updates: 1. Use an MDM (ArborXR) configuration package 2. Use ...